Hot Products
0102030405
China Video Computing Cluster: Leading Suppliers and Factory Solutions for High-Performance Computing
| Specification | Model: XTQ1500FH-Z | ||
|---|---|---|---|
| Number of connected cameras | 1,500 channels | 21,000 channels | 24,000 channels |
| Number of concurrent video channels |
1,500 channels for 1080P 750 channels for 2K 375 channels for 4K |
21,000 channels for 1080P 10,500 channels for 2K 5,250 channels for 4K |
24,000 channels for 1080P 12,000 channels for 2K 6,000 channels for 4K |
| Encoding format | H.264 / H.265 | ||
| Output bit rate | Under the condition of 1920×1080 resolution and dynamic bit rate, the video stream output bit rate is ≤1M | ||
| Video compression ratio | Compress 4~10 times based on H.264 and H.265 encoding (original video file size / compressed video file size) | ||
| Image peak signal-to-noise ratio | PSNR ≥ 36dB | ||
| Video image similarity | SSIM ≥ 0.9 | ||
| Device delay | ≤ 200ms | ||
| System recovery time | ≤ 30s (abnormality recovery) | ||
| Fault migration | Automatic migration management of compressed video failure | ||
| Video resolution | Support 4K, 2K, 1080P, 720P video resolution access | ||
| Access protocol | Support RTSP standard protocol access | ||
| Output protocol | Support RTSP protocol and GB/T28181 protocol output | ||
| Power supply interface | AC220V | AC220V | AC220V |
| Equipment power supply | Dual redundant power supplies | Dual redundant power supplies | Dual redundant power supplies |
| Typical power consumption | ≤ 800W / unit | ≤ 800W * 14 units | ≤ 800W * 16 units |
| Network interface | 2 * 2SFP+10G optical port, 1 management port | 10GESFP * 4840 / 100GEQSFP28 * 6 | 10GESFP * 4840 / 100GEQSFP28 * 6 |
| Equipment form | 2U rack mount | 42U Cabinet | 48U Cabinet |
| Equipment size | 87mm * 446mm * 690mm (L*W*H) | Standard size | Standard size |
| Operating temperature | 10℃ ~ 35℃ | ||
| Storage temperature | -40℃ ~ 70℃ | ||
| Operating humidity | 20% ~ 80% (no condensation) | ||
| Storage humidity | 5% ~ 95% (no condensation) | ||
Frequently Asked Questions (FAQ)
What video encoding formats does the XTQ1500FH-Z support?
The XTQ1500FH-Z system fully supports standard H.264 and H.265 video encoding formats, ensuring wide compatibility with various IP cameras and legacy systems.
What is the video compression capability of this device?
It achieves high-efficiency video compression of 4 to 10 times based on H.264 and H.265 encoding, effectively reducing storage requirements while keeping high image similarity (SSIM ≥ 0.9).
How fast can the system recover from an unexpected abnormality?
The system features a rapid recovery response, with a system abnormality recovery time of ≤30 seconds. Additionally, it supports automatic fault migration management for compressed video failures.
What are the transmission delay and image quality metrics?
The device delay is extremely low at ≤200ms. It maintains exceptional visual quality with an image peak signal-to-noise ratio (PSNR) of ≥36dB and a structural similarity index (SSIM) of ≥0.9.
Which network interfaces and protocols does the system use?
Depending on the cabinet configuration, it supports either 2*2SFP+10G optical ports with 1 management port, or 10GESFP*4840/100GEQSFP28*6. For protocol integration, it supports standard RTSP access and RTSP/GB/T28181 protocol outputs.